Cowabunga system MT4 indicator

[Mark Trader]

Hi everybody!
Since I am paper trading the Cowabunga system, I thought I'd keep this thread alive =))
Obviously a great system but for some reason the indicator sometimes does not issue an alert when PipSurfer notes one in his blog, and visa versa, I get an alert and I place a trade but PipSurfer says in his blog that it was not a valid signal due to XYZ. In light of this, can someone please explain the following 2 things:

1. How to analyze the signals correctly and filter out the invalid signals? I am talking about situations when I get a signal and enter but then PipSurfer says in his blog <<This cancelled out the signal and I did not enter>>

2. Why I often don't get a signal when PipSurfer gets one? Is it possible that something is not set up correctly in my MT4? I am using Cowabunga- any pairV2 last modified on Nov 27th 2007. It is attached to the GBPUSD chart. Do I need to have osMA, RSI or something else attached to the chart or modify any other settings?

Thanks a lot, I would greatly appreciate it if anyone could answer these two questions.

P.S. Has anyone created an Expert Advisor for the system yet?

Sorry if this is long and happy trading!
Mark.

[RTI]

Hi Im new to MT4. Can anyone tell me how to get this indicator to my MT4? I have it in MetaEditor but cant seem to figure out how to get it to the Custom Indicators list. Please help.

Thanks
RTI

[linalm]

Originally Posted by RTI

Hi Im new to MT4. Can anyone tell me how to get this indicator to my MT4? I have it in MetaEditor but cant seem to figure out how to get it to the Custom Indicators list. Please help.

Thanks
RTI

You need to compile the .mq4 file and place the result (a .ex4 file) in the \experts\indicators of your Metatrader Platform. ... To compile, open the .mq4 file in MetaEditor and click on "compile" in the upper tool bar.

Hope this helps.

[RTI]

Thanks Linalm, I have tried but its either not working right or I dont know what Im doing. I think the later. When I compile it on the lower left corner it says description. Below that it says Compiling 'Cowabunga- any pairV2.mq4'
and below that it says 0 errors, 0 warnings. Thats it I dont know what to do from there. I have tried waiting about 3 hrs to see if it would finish but nothing changes. If anyone could help me I would appreciate it.

Thanks RTI

[Pipin Dayz]

I'm kinda new to this forum but not new to trading FX. I'm familiar with the Cowabunga system been playing with it for about 3 months now. Live, with a very small dollar amount.

Small enough not to be concerned with losses but good enough for me because I prefer live results over demo.

Anyway, I'm looking at this new pair V2 indicator for the first time today. I loaded it just fine it is coming up on my charts. However there is one thing I don't see and that is the arrows.

So my question.

Can anyone tell me how I can get my arrows to show up? Answered, my own question after further research.

So good luck everyone I will put more testing into consideration with this new indicator to see how things work.

If anyone is curious I only put $100.00 at risk in a live account at 400:1 leverage. To test this system. Trading only .01 - .10 $1K lots at a time. Which as you all can do the math but the cost of .01 lot was only $2.50 and my per pip move profit loss was only .10 cents per pip for each .01 lot. Nothing worth jumping for joy but good enough to test a system in live instead of demo, with real time results. I would not recommend this but my personal preference is live test over demo testing. Also going this route you must expect to lose. Why, because the win to loss ratio in learning is very, very, very low.

Good luck everyone. Make that $$$$$.

[campoli39]

Hey PipVentures could you let me know where I can download the indicator 3_MA_Cross_w_Alert_v2.mq4. It sounds interesting but I have never seen it before. Let me know.

thanks.

[Pipin Dayz]

As of this post I believe what your looking for was on page 12 Post 85 posted by andyk

Originally Posted by campoli39

Hey PipVentures could you let me know where I can download the indicator 3_MA_Cross_w_Alert_v2.mq4. It sounds interesting but I have never seen it before. Let me know.

thanks.

[Pipin Dayz]

Ok, this seems very odd to me.

I installed the V2 and Cowabunga MT4 Indicator for the GBP.

Ok, hope you can see my charts that I uploaded cause that will help you see what I see.

First, I do understand 100%, sometimes even the best indicators can give misleading signals. I accept this fact.

I more so want someone to confirm I've uploaded the files correctly something just don't feel right.

Why? Because looking at the gbp/usd regular cowabunga indicators gives the right signal sell. Yet on the same chart and same time the V2 applied to gbp/usd gives the complete opposite signal. Just so happens to be the wrong signal. So applying the V2 to the eur/usd gave me the wrong signal at the same time frame.

Question can anyone with experience look at my charts and try to compare against their charts and see if they get the same signal.

It could be I have the wrong upload or non updated file but I down loaded them from post 85.

Update:
Picture 1 V2 applied to GBP/USD
Picture 2 Cowabunga GBP/USD
Picture 3 V2 applied to Eur/USD

[raffy]

Hi,

i have been using the cowabanga system and the EA, and am very thankful

for this wonderful system and the EA that was shared here at babypips.

Though I have one problem. I have downloaded the EA(works perfectly)

But been having dificulty making the EA sound the alert, so i have to watch

my charts for the signals to change directions.

Can someone teach me how to make it sound?

Thans Raffy

[europeanson7]

Originally Posted by The7

Ok...When i was getting close to get crazy, i found out what is wrong with the indicator.
After installing the indicator to my MT4, all i saw was blue and red lines...NO DOTS- NO ARROWS.(i know i know...GPD/USD, 15 min chart) .Just simple lines. I am using Ibfx's Mt4( mini demo acoount).Then i went to metaquotesnet and downloaded the platform from there.The indicator was working just fine..dots, arrows...everthing visible.What bugged me was what the brookerages firm have to do with it? I opened a "standart demo" with ibfx and YESSSSSSSSS...its working....but no luck with the "Mini Account"
Does anyone have a clue what might be wrong?I contacted ibfx, they had no answer to that...

Yeah, it's so wierd. The first time I put the indicator on I saw red and blue arrows but everytime I load it after the first time it is only thick red and blue lines. I tried installing a new version of MetaTrader and it did it again, worked once then went wierd. Anyone have any idea wtf is going on?