The finest in trend trading

[tymen1]

I am sorry that I cannot help with the MT4 stuff but I see that you are sorting that out amongst yourselves.

If there are real problems then I shall send a private message to [B]DodgeV83[/B], who is an expert in this area.

[tymen1]

Jack B Pip,

When you are selecting the indicator from the list, you should see a small checkbox under the list, which says “Add on new subgraph”. Uncheck that, and you should be right.

Thank you for giving the answer and saving me the trouble, [B]mkbrooks[/B].

That is a very nice picture of you in the avatar!!

[tymen1]

[B]PLEASE NOTE[/B]

[B]Because of the speed this thread is growing and the monotony of my answers to questions…

…If you think you know the answer to a question or problem somebody has posted, then please feel free to answer that question or problem.

…this act of answering other questions will help all readers greatly in your learning process…

…the reason this works is because you are [U]active [/U]and no longer [U]passive[/U].[/B]

This also has the effect of taking the weight and burden off me and allows me to present new material only.

[tymen1]

First I want to say what an awesome thread this is.
…

Welcome also to this thread [B]mobius435[/B].

Hope you can gain something from here too!!

[tymen1]

hi tymen. see the picture below please

do you think this can be used with your system too? this seems to give faster entrys than mmacd… and faster exits. please give me your opinion

the red arrows are mmacd entrys and the blue are the other indi entrys.

I see that you got this set of indicators out of the ICHIMOKU trading system.
Coming off the high, if I remember rightly??

There are a host of combinations possible here.
I have thought about this too but have not had the time during my holidays to check it out. :o

I did check out the method using [U]Weighted moving averages[/U] in the MMACD.
They turned out to be too quick and created far too many whipsaws.

We still, however, have to look at the signal line.
You may be suitably impressed with this.

as soon as tymen saw this pics i´ll erase them so they don´t disturbe the thread.

No leave it - don’t do that.
I will want to refer to it later if it shows an improvement!!

[tymen1]

I`m pretty sure that tyen1 method wont work forex is rulette remember that

I will answer this matter separately, but right now, I am not pleased that you speak out of complete ignorance!!

Originally posted by [B]Ruilima [/B]>

if you believe in that what are you doing in a forex forum? go to a casino instead

Exactly!!

[tymen1]

…
Here is a chart. I have 2 arrows under the candles. Which of these 2 candles would have been the correct entry candle?

I agree with PTB on this one.

Could you please use the wonderful GFT chart facilities to greatly magnify that entry section where you have drawn the 2 candles.

[tymen1]

I have noticed that too on a number of MMACD entry signals,…
end up crossing or closing close to the BB.

The fact that the entry candles cross the BB is not important.

The method that is used in Philippe Cahen’s book, Dynamic Technical Analysis actually requires [U]2 entry candles crossing the BB[/U] as a pre-requisite to trading.

What is important is that the price action continues in the direction of the trend you have chosen!!

[tymen1]

I have been trading this system in my demo account for about a few days now …

You should not be trading this method at all. :eek:

It is by no means complete.

Bit like living in a house that is only partly built - the roof is not yet on!!

[nothingbutbull]

You can’t blame a student for being eager, I only wish i was this focused in college.

[tymen1]

[B]Now for this complex post >>>[/B]

In post #641, on page 65, we see that Tymen applies the new MMACD indicators. This results in the origin crosses occurring at 2 different points.

However, they line up [B][U]within[/U][/B] the candles he has proposed for entry.

I was of the belief that we must enter the trade when the candle at which the ‘0 cross’ on MMACD occurs has [U]closed[/U].

Post #642 actually.

[U]Closed [/U]is correct.

The green line goes straight thro the middle of the red candle.
When the red candle close is completed, the zero crossover of the MMAD is also registered.
We can then enter at this close.

Post #643, …

???
This is a discussion post.

Finally, I have one last question regarding the charted in Post #647

This is a post by [B]Didilut[/B].

[B]I will carefully answer your questions if you will give me the correct post numbers!!
Your original post is kept here so I can refer back to it!! :)[/B]

[anonymousdave]

I only wish i was this focused in college.

Amen to that.

[tymen1]

It is late here and I have medical appointments in the morning. :eek:

I have yet to answer the questions by [B]xXTrizzleXx [/B]and reply to the accusation that forex is gambling.

I intend to prove that forex is not gambling beyond any shadow of a doubt!!

Completion tomorrow!! (Ahhh - Friday!! :D)

[didilut]

hello everyone …
I will post a small indicator, compared with MMACD 50 / 3
it is sometimes faster, you have to see if it can be useful.
best regards:)

[didilut]

sorry i can’t copy the file here:(

[didilut]

it’s ok for the indicator I am e very real nwebie:D

DM_RangeFactor.zip (2.78 KB)

[ninety9]

Are this the same DMRangeFactor in MQ4 form?
Two attached MQ4 form in one .zip file, therefore editable. Would be nice if anybody would try to post the .MQ4 form so anybody could improve (or try to improve/change) on the code. After all we are here to learn, share, improve and try to make money. :eek:

DMRangeFactor.zip (2.51 KB)

[Aarnog]

Good news!

Thanks to the wonderful people at FxCodebase (I will not provide the link, you’ll have to Google them - shouldn’t be hard to find), who coded it for me (because I have no idea how to code, and Marketscope 2.0 takes .lua files), I have the indicators for this method - attached to this post.

Again, these are for Marketscope 2.0 users only (FXCM, Tradestation, MF global)

You NEED to have the GMMA indicator installed (not active) on your Marketscope for the GMMACD to work - the GMMACD is edited so the short average is 3 periods, and the long average is 50 periods, so you don’t have to worry about that.

Enjoy!

Marketscope indicators.zip (1.43 KB)

[Merchantprince]

Good news!

Thanks to the wonderful people at FxCodebase (I will not provide the link, you’ll have to Google them - shouldn’t be hard to find), who coded it for me (because I have no idea how to code, and Marketscope 2.0 takes .lua files), I have the indicators for this method - attached to this post.

Again, these are for Marketscope 2.0 users only (FXCM, Tradestation, MF global)

You NEED to have the GMMA indicator installed (not active) on your Marketscope for the GMMACD to work - the GMMACD is edited so the short average is 3 periods, and the long average is 50 periods, so you don’t have to worry about that.

Enjoy!

HUZZAH, Aarnog! Well done and thanks much-ly!

[ninety9]

That is decompiled code :eek:

Yes and No, it is the DMRangeFactor in MQ4 form. Therefore just double click it, MT4 platform will open the editor and then compile it. Insert it into your indicator folder and “voila” you can insert it in your chart. At the same time if you like to change it, you change it before compiling then compile and you have your own version if you did not make an error. Compile will let you know if there is an error.
Credits and who made it are always in the top section.